We are continuing our discussion of the use of a Straight Line Action Clamp in a weld fixture.
The purpose of the clamp in our sample fixture is to move a locating pin into a hole in the product part to locate. Then, after the product is welded, the Straight Line Action Clamp can retract the pin, so that the product can be removed from the weld fixture.
In this weeks blog video, a round locating pin is replaced by a diamond pin in our sample fixture. using a straight line action clamp. Instead of locating the customer’s product in the weld fixture, we have changed the purpose of the pin. It is now only orienting one product part with respect to the other product parts to which it will be welded.
Next time we will be talking more about this diamond pin and the bushing block it is moving in.
There is a form on the right hand side of our website where you can sign up to be notified of education and updates. When you sign up we will will send you an email each time a new Weld Fixture Design 101 lesson is posted.
Thanks for learning with me. Please feel free to leave your comments and questions in the comment section below.
The Queen
